If you've been following what I have posted, then obviously this is part 2 of the whole thing. If you're the kind who just want to read up on my personal experience on it, then you're at the right page. The previous post was kind of a long preface to the whole thing. Anyway...
Originally I did not know what I was getting into. This was going to be my first 3rd-party unlicensed product purchased. Meaning, I never knew if there was any particular problem, quirks, issues, and what-have-you. Basically, I was flying blind. I do not know if they are reputable. I do not know if there are quality issues. I do not know if it is worth the price. So it was a gamble.
When I noticed that my order has shipped out, I kept a close eye on it as it rode on a FedEx truck from TFSource over to the suburbs of Boston, Massachusetts. As soon as I saw the FedEx truck pull up, I ran out the door to greet the man. Finally, and at long last.
I carefully cut the tape like any neat freak would have to open it up. I had to remove brown crumpled paper padding, foam lining, and a cardboard layer just to remove the product from the box. Yes, TFSource packaged it like that. I dare any other companies to try to do the same.
The gift set came with the toys mostly arranged so that you can piece them together to form Giant right on the spot. This is a nice setup to have. But it is also not a good start. The instructions booklet that came with it showed steps for changing from vehicle to robot and from vehicle to component (for Giant assembly). So it was a bit tricky trying to reverse the steps to get it back to vehicle mode.
Each vehicle mode is designed very nicely. The design on having the vehicles look like actual construction machines is surprisingly good for a 3rd-party design. The build constructions feels solid and the paint application looks very good. As with any toy design, where there is parts the toys excel in, there needs to be a compromise in another. Some parts do not turn, rotate, or move. Yet, I cannot find myself to fault Maketoys for doing that. There is probably one or two places within the whole set that may not entirely fit snugly or correctly. But given the amount of money invested into this, I dare not try to force it in. Still, it is a minor issue and exists only on the dump truck toy in vehicle mode.
Changing them from vehicle to robot mode proved to be an interesting challenge. But, again, having invested so much in getting this toy set, I resorted to using the instructions booklet to ensure that what I am doing does not mean I'll end up breaking a piece off. Of the six that I have handled, the most complex and intricate is perhaps the front-end loader, aka "Scrapper." His transformation steps was probably the most tricky of them all. The most stiff is definitely the mobile crane, aka "Hook." Trying to get the arms to properly set and become arms proved to be the most stiff. On that, I can see that they could use a bit of improvement on it and make it less stiff. Overall, each piece are molded in a frighteningly precise specification that makes Hasbro's toy release feel like Lego bricks. Granted, these are high quality toys designed by a 3rd party. And they probably have that intention of being as high of a quality as possible. Still, the way it is all designed gives you the feeling that there is little room for error. It's a minor thing. Such a flaw is probably a 0.1 or 0.2 point deduction out of 10 or 5.
Piecing each figure together to form Giant is an experience on its own. Where to start is often a question one will ask. I think for most, they start at the legs/feet. Getting them set is simple, at least for Mixer. Front Loader though is a different story. One has to arrange the back heel so that it is aligned correctly. It is then held together by the engine that is popped off. Setting up Dump Truck was fairly easy, as I have already seen how it looks when I first took it out of the box. Changing him into the lower-torso and hip means changing him partially into robot mode. Once that is done, connecting him to Front Loader and Mixer was simple. The locking mechanism is probably the best way of knowing that the connection is secure. I welcome that any day as this makes assembling a gestalt a more fulfilling experience. The next step I took is to get Mobile Crane set to become the upper torso/chest and head. The head is pre-connected. Revealing it is a matter of sliding the head out and flipping the "cap" up. It is there I experience what others have noted on their review of Mobile Crane: the head does not look up well. I am not entirely sure if this is a fault or if this is by design. Thus I do not know if a point deduction is warranted. But I'll leave it as it is for the time being. Connecting Mobile Crane to Dump Truck to complete the body is a simple matter of aligning the slots up and letting the locking mechanism hold it in place. For Excavator and Bulldozer, setting them up is a simple matter of pulling out part of the arm piece, snapping into place, and rotating the pegs appropriately. One has to be careful on connecting the forearms to the vehicle itself, it can be a bit tricky trying to pull them apart and reorienting it. While preview photos of Giants never showed this, the hands are designed with individual fingers. However, the fingers themselves are static and curled. Still, this is a nice thing to have for a big piece like this. Connecting each arms means plugging the peg into Mobile Crane which has a locking mechanism there too. Once both arms are connected, the Giant figure is complete, more or less.
In the short time that I have tinkered with Giant and each individual toy itself, I find the overall experience to be great, much to my surprise. I did not know what to expect even though I have looked at the same photos so many times. Yet it never ceases to amaze me just how awesome it looks. Yes, it is factually noted that he is smaller than TFC Toys' Hercules. But the size difference is rather minor to be honest. And the savings you get for choosing Maketoys' version over TFC Toys' is immense. Those with smaller and tighter wallets may opt for Maketoys' version for their Devastator fix.
The common question to be asked is... "Is it worth it?" That's something I cannot honestly answer. This is my first 3rd-party toy purchase. And it may not be my last either. The build quality is definitely up there. I can say with confidence that it is superior to both Hasbro and Takara-Tomy. Often if I were to buy official Transformers toys, I tend to get the ones released and offered by Takara-Tomy. It is due to the fact that the mold quality and paint application quality is superior to the ones released by Hasbro. Still, it is a very heavy investment. The most I can every say with regards to this is to contemplate over it heavily. Never be hasty in ordering right off the bat, unless you're easily raking in dough.
The next common question is perhaps "Am I happy with this purchase?" I'll say yes to that. Yes it hit the wallet hard. And I did gave some serious thoughts when I was browsing through several photos. Yet I heard no news from neither Hasbro nor Takara-Tomy about having a reimagined Constructicons. Something has got to give. So I went with this. Yet at the same time, I cannot help but wonder... Even if Takara-Tomy or Hasbro were to design and produce a reimagined Constructicons, can it ever live up to the quality of design that both TFC Toys and Maketoys produced? Or more importantly, can it ever match the build quality that both of these 3rd-party companies put out? I've long supported Takara-Tomy, especially in their Masterpiece line and their defunct Binal-Tech line of toys. But the current generation of toys being produced now is mostly derived from the Fall of Cybertron game and the Transformers Prime TV series. For the time being, there is virtually nothing for me to look at. I guess you could say that they created the void in which TFC Toys and Maketoys have filled.
Friday, October 12, 2012
You could say that there are two or three types of Transformers fans, all of which grew up in a certain period or era. The first is, of course, the Generation 1 era. Fans of this era remember the old days of watching the series on TV, seeing the movie on the big screen or on home video, and the feeling we got when we saw Optimus Prime died. Back then, both Prime and Megatron were a truck and a Walther P38 pistol respectively. It was also the time when we saw a team of smaller robots combine to form a bigger and more powerful robot. And thus, the gestalt was born.
The next in the era and fans were the Beast Wars, Machines, and imported anime series. These include the entire Beast Wars CG series as well as the horrible follow-up Beast Machines. The Japan-only Beast Wars II and Neo anime series are within this realm. What followed were Robots in Disguise, Armada, Energon, and Cybertron, series that were originally done in Japan and brought over to the US for airing. Their Japanese name counterparts were Car Robot, Micron Densetsu, Super Link, and Galaxy Force in the same order.
Then there's the Michael Bay Transformers -- 3 movies that spawned a new line of toys, designs, as well as terrible writing, acting, and creative input. There are those who like it. But there are those, like me, who despise it.
But that's the basic gist of it, for the different types of Transformers fans out there. So why the explanation of all that? Because there are those who do not know it. There are people out there who know next to nothing about the whole Transformers series and culture, and know next to nothing about who is who and what they change into. But that is okay. It helps them to realize that the Transformers name is much bigger than just the three shoddy movies that Michael Bay put out.
While the toy itself was over 20 years old, it would take Takara-Tomy, the Japanese company that handles the release of Transformers toys (and often times, the design as well), just as long to reissue the very toy that boosted the success of the Transformers line. However, times have changed since its initial release. The toys themselves were simple, often bulky, and very limited in articulations. But that is to be expected for a toy that was designed, produced, and released 20+ years ago.
Now, there has been some interesting toy releases since then prior to reissued Devastator. They were named as Generations in America and Henkei in Japan. They featured toys reimagined using today's more modern vehicle or toy designs. One of the first two to come out were, obviously, Optimus Prime and Megatron. Interestingly enough, the release of Megatron marks the first time he turns into a pistol/gun in years. This gave fans some ideas as to what they would like to see next. One of the obvious request is the Constructicons. But ever since the first set of Generations toys came out, there has been no words or news about ever a Constructicons set being planned or designed for that matter. And thus, the idea falls upon two 3rd-party companies, who seeks to unleash their creativity ideas onto the world in two ways.
TFC Toys settled on their design based on the concept and idea of Generations reimagining. However, part of the design process was partially eliminated due to the on-going comic book that featured the Constructicons. Their Devastator would then be named Hercules and it would be their tribute and homage to the Constructicons team. On the other end of the spectrum, Maketoys sought a different design process. Their design idea is based on the Generation 1 toys. Thus the vehicles and combined form will appear the most familiar. And they would named their combined form as simply... Giant.
The result would be a set of unlicensed 3rd-party toys that both Takara-Tomy and Hasbro never ventured into. They had ample amount of time to design, produce, and release it. But we never saw nor heard of anything with regards to it. In the end, it's a shame that neither companies would take that step to do something as big as this.
Both TFC Toys and Maketoys differ in many ways for their Constructicons homage. The most obvious is in size and in price. At the time of composing this, individual piece for TFC Toys' Hercules set costs just over US$100. The total expense would result in a set weighing in over US$600. For many, this is a hard price to swallow. On the other end, Maketoys' Giant originally came in three packages that featured two pieces of the set. Each package were released with a price of around US$120 each. The whole set would total about US$360, significantly less than TFC Toys' offering.
Originally, Maketoys' Giant series were released in yellow color. This is perhaps homage to the Generation 2 colors that were released during the decline of Transformers' popularity. Words of a green color variant came about and would be released as a complete gift set, featuring all 6 pieces, plus toy design updates. I jumped on it. Granted, this is a hell of an expensive toy offering. But it is a lot lighter on the wallet than TFC Toys' asking price. The wait was long. But the extended wait that I had to endure helped alleviate the harsh hit on the wallet.